Technical Specifications and Installation Guide

Download the full electrical specs and data sheet for our signs here:

Technical Specifications

LED Light Installation Guide

Ensure you have all necessary tools and components before beginning:
Required tools: 6mm drill bit, drill, screwdriver, glass glue, hammer or rubber mallet.
Included components: LED light fixture, long screws, installation guide (numbers/letters).

Step 1: Position the Installation Drawings

• Secure the provided installation template or drawings to the desired wall location using tape or adhesive.
• Ensure the drawings are level and aligned according to your design plan—this will guide accurate hole placement.

Step 2: Drill Mounting Holes

• Using a 6mm drill bit, drill holes at the marked points indicated on the drawings.
• Drill to a depth suitable for the length of the provided screws (typically 30–50mm).

Step 3: Prepare the LED Fixture

• Locate the screw ports on the back of the LED light.
• Insert and tighten the long screws into these ports, leaving the heads exposed for wall mounting.

Step 4: Apply Adhesive to Wall Anchors

• Inject glass glue or a suitable wall adhesive into each drilled hole.
• This step enhances stability and long-term adhesion, especially on smooth or tiled surfaces.

Step 5: Mount the Fixture

• Align the screws attached to the LED light with the drilled and glued holes.
• Carefully insert each screw into its corresponding hole.
• Tap gently with a rubber mallet or press firmly by hand to ensure the fixture is flush and secure.